Lompat ke konten Lompat ke sidebar Lompat ke footer
Beranda / Windows 10 won't boot with 2nd hard drive [Solved]

Windows 10 won't boot with 2nd hard drive [Solved]

Posting Komentar

Windows 10 won't boot with 2nd hard drive [Solved]

Passionate about all elements related to Windows and sorbed with his innate curiosity, Ivan has delved deep into understanding this OS, with a specialisation in drivers and driver troubleshooting. When he's non tackling... Read more

Updated:

Posted: Feb 2018

  • Secondary computer memory is much welcomed for your data. Even if isn't frequently accessed, it's still of great importance.
  • If Windows 10 stern't boot with 2nd disk drive, the below-registered troubleshooting tips will assist you out.
  • Even if our instructions were useful, don't hesitate to undergo a depend at our Solid Private road Errors section too.
  • Finally, bookmarker this Laptop and Computer Hub for more than guides that will walk you through afloat solutions to all your problems.

Fix Windows 10 2nd hard drive issues

XINSTALL BY CLICKING THE DOWNLOAD FILE

Sometimes installing a 2nd disk drive may interrupt the default on boot process and prevent your PC from booting. In addition, you may embody unable to get at Windows every bit the PC would arrest at inauguration.

Nonetheless, the Windows Report team has compiled the right solutions for you ready to fix this job.

What can I practise if a newly solid drive won't iron heel along Windows 10?

  1. Set boot disk at the top of the computer's boot order in BIOS
  2. Tick the Microcomputer-to-HDD's connections
  3. Update HDD drivers
  4. Run Automatic Repair/Start Repair
  5. Supervene upon your Hard Winchester drive (HDD)

1. Set the boot disk at the top of the computer's boot out order in BIOS

  1. Major power up your estimator.
  2. Press the F1 key or whatsoever specified key fruit to enter the BIOS (other keys such as F1, F12 or Delete may constitute utilised contingent on your HP system).
  3. Turn up your reckoner's boot order under BIOS Boot.
  4. Select the HDD/SSD i.e. the charge disk and act it upwardl using the arrow key.second hard drive stops boot
  5. Save the changes by following the screen prompts and exit the BIOS.

One of the reasons for this problem is because the HDD/ boot phonograph recording is non at the top of iron boot put. The system retrieves boot info and OS inside information past following a boot ordinate.

Iron boot ordain consists of the sequence of sources which the computer searches in order to retrieve legal information.

Meantime, BIOS enables you to stipulate a drive past its position in the insensitive-drive list As below (eg HDD-1, HDD-2, etc.) make sure that your pilot drive is along the SATA0 data cable, and the new one is connected the SATA1. Hence, the system will try to read inactive the SATA0 drive first.

However, if the HDD/boot disk is non at the top of the reboot order, the computer tries to flush from some other source which results in the error content.

If you mean to set the boot disk i.e. HDD at the top of the the boot order in BIOS (Elemental Stimulus/Yield System), follow the above steps.

If you want to stay fresh your organisation lengthwise smoothly, you can get a sacred Windows optimizer software. They typically admit cleaner utilities, too as disk direction tools that are more than substance abuser-matey than the BIOS.

2. Check the Personal computer-to-HDD's connections

  1. Ability off your computer and dispatch the battery. Open functioning your computer's casing afterward.
  2. Come off the HDD from your computer.
  3. Clean all the ports and wirings linking the HDD to the computer and also check the SATA and power cables.
  4. Replace the faulty cables you notice and fix loose connections.
  5. Now, reconnect the HDD to the computer. (Ensure that all the connections are fastened tightly.
  6. Hence, attach the battery and power up your computer.

Sometimes, the laptop computer whitethorn have wobble resulting in a untangled state of the Microcomputer-to-HDD connections; the wires connecting the HDD to the system and vice versa might take up been unfastened which causes the moment hard drive to stop the bang process.

In order to check the PC/HDD wire connections, you need to enjoyment a screwdriver. Follow the above steps to fit the connections and pickle the job.

However, if you do not have the tools and required practical knowledge neck-deep in using this method; information technology is advisable that you confer with a figurer technician or computer direct to service you out.

3. Update HDD drivers

Sometimes the only elbow room to kettle of fish this trouble is simply to visit your laptop computer manufacturer's website and download the latest drivers' drivers for your laptop. After downloading the a la mode drivers, uninstall your latest unitary by following these steps:

  1. PressWindows Key + X and selectDevice Manager from the leaning.
  2. WhenDevice Managing director opens, locate yourTouchpad device driver, right-click it and chooseUninstall.
  3. If available, selectBlue-pencil the driver software for this device and clickOK.
  4. After the driver is removed, resume your Personal computer.
  5. When your PC restarts, install the latest driver and moderate if that fixes the problem.

Sometimes updating drivers manually could be very stressful and time-consuming. All the same, you can forever opt to execute all processes through ordinal-party software system. These tools not only will show you the right driver version for your device simply bequeath prevent too Personal computer damages.

⇒ Get DriverFix

4. Run Automatic Recreate/Protrude Repair

  1. Insert Windows bootable installation DVD and restart your PC.
  2. Press some key to boot from CD or DVD when prompted to continue.
  3. Select your language preferences, and click Next.
  4. Chink Revive your computer in the bottom-left.
  5. In the Choose an option screen, Click Troubleshoot > Click Advanced option > Automatic Bushel or Inauguration Compensate. Then, wait for the Windows Automatic/Inauguration Repairs to be complete.
  6. Restart your PC and boot to Windows. Impound the second hard tug afterward.

You can likewise fix iron heel error trouble by performing automatic fixing/start repair on your organization by exploitation the Windows bootable installation DVD.

5. Replace your Hard Disk Drive (HDD)

In the end, you need to consider replacement your PC's HDD because it may be faulty. You can remove your HDD, connect it to another PC to access the files and folders connected the PC, and also confirm if IT boots up from the HDD.

Lag, if the new Microcomputer is ineffective to identify and access the HDD, then you definitely need to replace it with a early one.

However, if the Personal computer can find and access the HDD, then the probable cause for the error problem is the inaccurate SATA cable.

The SATA cable connects the HDD to its motherboard; we extremely recommended that you replace it with a new one. You pot carry extinct the replacement by a business computer direct.

In conclusion, feel free to gossip us below if you have any questions concerning the solutions we mentioned above.

No less important, keep in mind that the above solutions are recommended whenever experiencing these issues as well:

  • External disk drive prevents booting – Booting issues spell an external hard tug is present are nothing out of the ordinary. You may reset your UEFI background vertebral column to default or give the above tips.
  • Computer won't boot with the external disc drive plugged in – If that's a problem you stool't get rid of, running Automatic Repair/Start Repair or reformatting external drive may service.

Frequently Asked Questions

Windows 10 won't boot with 2nd hard drive [Solved]

Source: https://windowsreport.com/second-hard-drive-stops-boot/

Posting Komentar untuk "Windows 10 won't boot with 2nd hard drive [Solved]"